P525

Honey Wax® Hydro Speed

Honey Wax® Hydro Speed is a unique, high gloss wax emulsion for use by composite fabricators as a mold release agent. It is compounded with the purest grade carnauba wax, plus special binders and spreading agents.

 

Honey Wax® Hydro Spe...

P52314

Honey Wax®

Honey Wax® is a unique, high gloss paste wax for use by composite fabricators as a mold release agent.  It is compounded with the purest grade carnauba wax, plus special binders and spreading agents.

 

Honey Wax® reduces man hours due t...

P52115

Honey Plus Wax

Honey Plus Wax is a high gloss paste wax for use in open molding by a composite fabricator that requires a wax mold release agent that can perform in both normal and high-exotherm molding temperatures.

 

Honey Plus Wax is an excellent r...

P54016

Honey Wax® 100

Honey Wax® 100 is a pure, carnauba paste wax containing no silicones or fillers. It is designed for the composite fabricator who requires a very high quality paste wax mold release agent.

 

 

Honey Wax® 100 is an excellent mold rele...

P52111

Honey Wax® 250

Honey Wax® 250 is a unique, high gloss paste wax for use by composite fabricators as a mold release agent. It is compounded with the purest grade carnauba wax, plus special binders and spreading agents. Honey Wax® 250 reduces cycle times due to...

P50901

Honey Edge Wax

Honey Edge Wax is an economical, general purpose mold release agent designed for tooling surfaces not requiring a class A surface.  Honey Edge Wax is typically used on the flange areas of molds, the edges of molds, on polymer concrete molds, or...

P51201

Honey Slurry Wax

Honey Slurry Wax is an economical, general purpose mold release agent designed for tooling surfaces not requiring a class A surface.  Honey Slurry Wax is a “softer” version of Honey Edge Wax and is typically used on the flange areas of molds, t...

P229

P229 Polylso Release

Stoner® P229 PolyIso™ Release is an extremely cost effective concentrated silicone and water emulsion that has proven to easily release polymer concrete, centrifugal cast FRP, and male or female molded non gel coated polyester or epoxy based co...

P51701

Honey Wax® Liquid

Honey Wax® Liquid is a mold release agent specifically formulated for use in the manufacture of reinforced fiberglass products using polyester resins.  Because of its unique solvent carrier, Honey Wax® Liquid removes old wax, styrene buildup, p...

P52314

Honey Wax Liquid HT

A high temperature version of Honey Wax Liquid formulated to work with higher exotherm resins up to 240° F.

P59101

KantStik® Sealer 1.0

KantStik® Sealer 1.0 is our second generation polymeric coating designed to reduce surface area and impart a hard, new and chemically resistant barrier on tooling surfaces.  New or reconditioned tooling surfaces have natural porosity and irregu...

G471

XK-22 LV.5 Mold Release

Stoner® XK-22 LV.5 Mold Release is a unique, highly effective semi-permanent mold release, representing a significant step forward in release technology for the composite industry. It combines fast cure with outstanding chemical and abrasion re...

G472

XK-22 LV.1 Mold Release

Stoner® XK-22 LV.1 Mold Release is a unique, highly effective semi-permanent mold release agent designed to release epoxy and phenolic resin systems. It combines fast cure with outstanding chemical and abrasion resistance. It gives a smooth, co...

G494

FRP-QB Release

Stoner® FRP-QB Release is a unique, highly effective semi-permanent mold release agent designed to release resin systems such as isophthalic, orthos, DCPDs and vinyl esters. It performs effectively as a Wipe On/Leave On or a Spray On/Leave On r...

G495

FRP-SC Release

Stoner® FRP-SC Release is a unique, highly effective semi-permanent mold release agent designed to release resin systems such as isophthalic, orthos, DCPDs and vinyl esters. It combines fast cure with outstanding chemical and abrasion resistanc...

P59301

KantStik® Cure Fast 1.0

KantStik® Cure Fast 1.0 is our second generation, fast curing, three coat semi-permanent release system that combines the sealer and release agent into one product.   KantStik® Cure Fast 1.0 will effectively seal the pores on both new and recon...

TRA9825

TraSys® 9825

Trasys® 9825 mold release coating is a water-based dispersion for hot mold applications.  When applied to a mold, it exhibits outstanding durability and antistick properties and has a very low coefficient of friction.  It is clean, non-oily, no...

TRA420

TraSys® 420 Mold Release Agent

TraSys® 420 mold release coating is a translucent water-based  dispersion for rotational molding applications. When applied to a mold, it exhibits outstanding release or antistick properties and has a very low coefficient of friction. It is cle...

E455

Thermoset Mold Release

Stoner® E455 Thermoset Mold Release is specially formulated as release agent and anti-stick lubricant for compression molded reinforced thermosets.  It allows molded parts to be painted, plated, hot stamped, adhesive bonded, labeled, or otherwi...

E497

Thermoset Mold Release

Stoner® E497 Thermoset Mold Release is specially formulated as release agent and anti-stick lubricant for molded thermoset plastics, rubber, and similar materials. It allows molded parts to be painted, plated, hot stamped, adhesive bonded, labe...

P53601

KantStik® Mold Cleaner

KantStik® Mold Cleaner is a blend of solvents designed to dissolve and remove most release agents and resin buildup from molds without dulling the surface.  It is ideal for preparing mold surfaces for the application of KantStik® mold release a...

P54305

Styrid®

Styrid® is a unique styrene suppressant added to polyester or vinyl ester resins that will not hinder interlaminar adhesion. Provides suppression rates in excessof 50%.  Styrid® when used properly in polyester resin, will reduce styrene emissio...